Bienvenue chez Smart Energy Shop!

Victron Energy - Fischer Panda 

Panier:

0 item(s) - 0,00 €
Votre panier est vide.

0

Plus de vues

Victron PHOENIX SMART CHARGER 12/50-1+1

PSC125051095

  • Courant de charge (A): 50A
  • Tension de batterie (VDC): 12VDC
  • Nombre de sorties DC: 1 + 1
OU

Le câble d'alimentation doit être commandé séparément (accessoires).

Bluetooth Smart enabled 
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. 

Phoenix Smart (1+1): two outputs to charge 2 battery banks 
The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery. 

Phoenix Smart (3): three full current outputs to charge 3 battery banks 
All outputs can supply the full rated output current. 

Automatic voltage compensation 
The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details. 

Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage 
The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used. 

The right amount of charge: variable absorption time 
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged. 

Preventing damage due to excessive gassing: the BatterySafe mode 
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached. 

Less maintenance and aging when the battery is not in use: the Storage Mode 
The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. 

Also charges Li-ion (LiFePO₄) batteries 
Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively full control of voltage and current can be achieved with Bluetooth. 

Fully programmable charge algorithm 
The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button (see specifications). 

Remote on-off 
The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. See manual for details. 

VE.Direct interface 
For a wired data connection to a Color Control panel, PC or other devices. Please see the VictronConnect app under Downloads / Software on our website. 

Programmable relay 
Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.

  • Réf. de Code: PSC125051095

Lader eigenschappen

  • Nombre de sorties DC: 1 + 1
  • Tension de batterie (VDC): 12VDC
  • Courant de charge (A): 50A
  • Courant de charge auxiliare(A): 3
  • Caractéristique de charge: 5-étappes adaptives
  • Tension d'absorption (V DC):
  • Tension de float (V DC): 13,8
  • Tension stockage (V DC): 13,2
  • Tension d'entrée: 85-250V AC of 290-375V DC
  • Fréquence: 45-65 Hz
  • Sonde de température:
  • A utiliser comme alimentation:
  • Contact libre potentiel:
  • Sonde de tension:
  • Courbe de charge, batterie au lithium-ion:
  • Sortie Si:

Algemene eigenschappen

  • Bluetooth Smart:
  • Température de fonctionnement:
  • Humidité (sans ruisellement): max 95%
  • capacité batteries recommandée (Ah): 250 - 500 Ah
  • Connexion aux ordinateur RS-485 VE.Net:
  • Port de communication bus CAN:

Behuizing

  • Matière boîtier: aluminium
  • Couleur: bleu RAL5012
  • Raccordement batterie: schroefklem 16 mm²
  • Raccordement AC: IEC
  • Classe de protection: IP43
  • Ventilation:
  • Dimensions (hxlxp) (mm): 180x249x116
  • Poids (kg): 2,7

Beveiligingen

  • Tension batterie trop élevée:
  • Détection d `inversion de polarité:
  • Court-circuit:
  • Tension d'entrée trop bas:
  • Température trop élevée:

Normen

  • Sécurité: EN60335-1, EN60335-2-29
  • Emission: EN55014-1, EN61000-6-3, EN61000-3-2
  • Immunité: EN55014-2, EN61000-6-1, EN61000-6-2, EN61000-3-3
  • Directive automobile:
  • Maritieme Nav, & Radiocommunicatie:
  • ADA010100100

    Câble d\'alimentation pour chargeur de batterie