Argo:
Charging current distributors are used in installations where various accumulators (in a 12 or 24 V connection) are used independently. Charging current distributors are needed to charge the accessory and start battery separately in, for instance, yachts and mobile homes. This is also feasible with a hand switch or separation relay, but these do not provide maximum safety (the dynamo tension increases when switching) and may even cause a fire. In addition, the various battery sets are charged simultaneously and separately with a charging current distributor, i.e. the battery that has discharged the most will receive the most charging current. The ARGO charging current distributors from Victron Energy are available for 2 or 3 batteries and with compensation diode. The battery isolators feature a low voltage of the alternator to get an optimum charge. The SKYLLA chargers have the necessary features built in.
Argo FET:
The ARGO FET battery isolators are available for 2 or 3 batteries. In contrast with the ARGO battery isolators, FET isolators have virtually no voltage loss. The voltage drop is less than 0,02V at low current and averages 0,1V at higher currents.
Elektrische eigenschappen
- Charge current (A): 200
- Current dynamo (A) max: 200
- Number of batteries: 2
- Possible to connect for compensation:
- Cable connection: M8 bouten
Mechanische eigenschappen
- Connection compensation diode:
- Dimensions (hxwxd) (mm): 65x120x200
- Weight (kg): 1,4