DC connector
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the
charger.
Charges 6V and 12V batteries
The charger will automatically adapt its charge algorithm to 6V or 12V batteries.
Protected against overheating and reverse polarity connection
The output current will reduce as temperature increases up to 40°C, but the charger will not fail.
Output relay protects against reverse polarity connection.
Eight LED’s for status and mode indication
When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output.
After connection to a battery (battery voltage must exceed 2V in case of a 6V battery and 7V in case of a 12V battery), charging is initiated by pressing the MODE button.
The state of charge of the battery is indicated by 4 LED’s. All charge level LED’s solid on: battery fully charged.
In case of reverse polarity connection, the orange LED ! will turn on after pressing the MODE button.
If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted.
The charger always starts in STANDBY mode when connected to the AC supply.
- Order refer.: BPC120134034R
Lader eigenschappen
- Number of DC outputs: 1
- Battery voltage (VDC): 6 / 12VDC
- Charge current (A): 1,1A
- Charge current starter battery:
- Charge caracteristics:
- Voltage absorption (V DC):
- Voltage float (V DC):
- Voltage storage (V DC):
- Input voltage range: 200-265V AC
- Frequency: 50-60 Hz
- Temperature sensor:
- Power supply:
- Potential free contact:
- Voltage sense:
- Charging curve, Li-ion batteries:
- Si output:
Algemene eigenschappen
- Bluetooth Smart:
- Temperature range: -20°C - +40°C
- Humidity (non condensing): max 95%
- Recommended battery capacity (Ah):
- Computer connection RS-485 VE.Net:
- CAN bus communication port:
Behuizing
- Material housing: kunststof
- Color: black
- Battery Connection:
- AC Connection: 1,5 m cable with EU
- Protection class: IP65
- Ventilation: no, natural convection
- Dimensions (hxwxd) (mm): 42x61x185
- Weight (kg): 0,56
Beveiligingen
- High battery voltage:
- Battery reverse polarity detection:
- Short circuit:
- Input voltage too low:
- Temperature too high:
Normen
- Safety: EN60335-1, EN60335-2-29
- Emission: EN55014-1, EN61000-6-3, EN61000-3-2
- Immunity: EN55014-2, EN61000-6-1, EN61000-6-2, EN61000-3-3
- Automotive Directive:
- Maritieme Nav, & Radiocommunicatie: