The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.
Up to three strings of PV panels can be connected with three sets of MC4 (PV-ST01) PV connectors.
The MPPT 100/50 charge controller and the EasyPlus inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.
The AC distribution in the 1600VA models consists of a RCD (30mA/16A) and four AC outputs protected by two 10A and two 16A circuit breakers.
One 16A output is controlled by the AC input: it will switch on only when AC is available.
Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.
Omvormer eigenschappen
- Battery voltage (VDC): 12VDC
- Continuous output power at 25°C (VA): 1600VA
- Continuous power at 25°C (W): 1300W
- Continuous power at 40°C (W): 1200 W
- Peak power (W): 3000 W
- Input voltage (VDC): 9,5-17V DC
- Output voltage (VAC): 230V +/-2%
- Frequency (Hz): 50Hz +/-0,1%
- Efficiency: 92%
- Zero load power: 8W
- Zero load power (AES mode): 2W
Lader eigenschappen
- Number of DC outputs: 1
- Charge current (A): 70
- Charge current starter battery: 4A
- Charge caracteristics: 4-steps
- Voltage absorption (V DC):
- Voltage float (V DC):
- Voltage storage (V DC):
- Input voltage range: 187-265V AC
- Frequency: 45-65 Hz
- Temperature sensor:
- Voltage sense:
Solar charge controller eigenschappen
- MPPT: 50A
- Max PV power: 700W
- Max PV Voc: 100V
- Efficiëntie: 98%
- Self consumption: 10mA
- Charge voltage absorption: 14,4V
- Charge voltage float: 13,8V
- Charge algorithm: multi-stage adaptive
- Temperature compensation: interne temperatuursensor
Algemene eigenschappen
- Temperature range: -20°C - +50°C
- Humidity (non condensing): max 95%
- Recommended battery capacity (Ah): 200 - 700 Ah
- Three phase capability:
- Power control:
- Power Assist:
- Transfer switch max (A): 16
- Number of AC inputs: 1
- Number of AC outputs: 3
- Multipurpose relais of driver: relais
- Lithium Ion battery compatible:
- Datacommunication: VE.Bus
- Power supply:
- Potential free contact:
Behuizing
- Material housing: aluminium
- Color: blue RAL5012
- Battery Connection: 2 kabels van 1,5m
- AC Connection: G-ST 18i
- Protection class: IP21
- Ventilation: Yes, temperature controlled
- Dimensions (hxwxd) (mm): 745x214x110
- Weight (kg): 15
Beveiligingen
- Low battery voltage:
- High battery voltage:
- Battery reverse polarity detection:
- Temperature too high:
- Overload:
- Short circuit:
- 230 V AC on inverter output:
- Input voltage ripple too high:
Normen
- Safety: EN60335-1, EN60335-2-29, EN62109
- Emission: EN55014-1, EN55014-2, EN61000-3-3
- Automotive Directive:
Victron Ekrano GX
Victron GX Touch 70 pour Cerbo
Victron Box for wall mounting for GX panels
Victron GX Touch 50 pour Cerbo
Victron Cerbo GX system monitoring
Victron Cerbo GX MK2 system monitoring
Victron Cerbo-S GX system monitoring