The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.
Up to three strings of PV panels can be connected with three sets of MC4 (PV-ST01) PV connectors.
The MPPT 100/50 charge controller and the EasyPlus inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.
The AC distribution in the 1600VA models consists of a RCD (30mA/16A) and four AC outputs protected by two 10A and two 16A circuit breakers.
One 16A output is controlled by the AC input: it will switch on only when AC is available.
Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.
Omvormer eigenschappen
- Battery voltage (VDC): 12VDC
- Continuous output power at 25°C (VA): 1600VA
- Continuous power at 25°C (W): 1300W
- Continuous power at 40°C (W): 1200 W
- Peak power (W): 3000 W
- Input voltage (VDC): 9,5-17V DC
- Output voltage (VAC): 230V +/-2%
- Frequency (Hz): 50Hz +/-0,1%
- Efficiency: 92%
- Zero load power: 8W
- Zero load power (AES mode): 2W
Lader eigenschappen
- Number of DC outputs: 1
- Charge current (A): 70
- Charge current starter battery: 4A
- Charge caracteristics: 4-steps
- Voltage absorption (V DC):
- Voltage float (V DC):
- Voltage storage (V DC):
- Input voltage range: 187-265V AC
- Frequency: 45-65 Hz
- Temperature sensor:
- Voltage sense:
Solar charge controller eigenschappen
- MPPT: 50A
- Max PV power: 700W
- Max PV Voc: 100V
- Efficiëntie: 98%
- Self consumption: 10mA
- Charge voltage absorption: 14,4V
- Charge voltage float: 13,8V
- Charge algorithm: multi-stage adaptive
- Temperature compensation: interne temperatuursensor
Algemene eigenschappen
- Temperature range: -20°C - +50°C
- Humidity (non condensing): max 95%
- Recommended battery capacity (Ah): 200 - 700 Ah
- Three phase capability:
- Power control:
- Power Assist:
- Transfer switch max (A): 16
- Number of AC inputs: 1
- Number of AC outputs: 3
- Multipurpose relais of driver: relais
- Lithium Ion battery compatible:
- Datacommunication: VE.Bus
- Power supply:
- Potential free contact:
Behuizing
- Material housing: aluminium
- Color: blue RAL5012
- Battery Connection: 2 kabels van 1,5m
- AC Connection: G-ST 18i
- Protection class: IP21
- Ventilation: Yes, temperature controlled
- Dimensions (hxwxd) (mm): 745x214x110
- Weight (kg): 15
Beveiligingen
- Low battery voltage:
- High battery voltage:
- Battery reverse polarity detection:
- Temperature too high:
- Overload:
- Short circuit:
- 230 V AC on inverter output:
- Input voltage ripple too high:
Normen
- Safety: EN60335-1, EN60335-2-29, EN62109
- Emission: EN55014-1, EN55014-2, EN61000-3-3
- Automotive Directive:
Victron Ekrano GX
Victron Box for wall mounting for GX panels
Victron GX Touch 70 pour Cerbo
Victron GX Touch 50 pour Cerbo
Victron Cerbo GX system monitoring
Victron Cerbo-S GX system monitoring
Victron Cerbo GX MK2 system monitoring