The all-in-one solar power solution!
The Victron EasySolar-II GX integrates the following elements:
- A MultiPlus-II inverter/charger
- A SmartSolar MPPT -Tr solar charge controller
- A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Omvormer eigenschappen
- Battery voltage (VDC): 48VDC
- Continuous output power at 25°C (VA): 5000VA
- Continuous power at 25°C (W): 4000W
- Continuous power at 40°C (W): 3700 W
- Peak power (W): 9000 W
- Input voltage (VDC): 38-66V DC
- Output voltage (VAC): 230V +/-2%
- Frequency (Hz): 50Hz +/-0,1%
- Efficiency: 96%
- Zero load power: 18W
- Zero load power (AES mode): 12W
Lader eigenschappen
- Number of DC outputs: 1
- Charge current (A): 100
- Charge current starter battery:
- Charge caracteristics: 4-steps
- Voltage absorption (V DC):
- Voltage float (V DC):
- Voltage storage (V DC):
- Input voltage range: 180-265V AC
- Frequency: 45-65 Hz
- Temperature sensor:
- Voltage sense:
Solar charge controller eigenschappen
- MPPT: 100A
- Max PV power: 5800W
- Max PV Voc: 250V
- Efficiëntie: 98%
- Self consumption: 20mA
- Charge voltage absorption: 57,6V
- Charge voltage float: 55,2V
- Charge algorithm:
- Temperature compensation: interne temperatuursensor
Algemene eigenschappen
- Temperature range: -40°C - +65°C
- Humidity (non condensing): max 95%
- Recommended battery capacity (Ah): 200 - 800 Ah
- Three phase capability:
- Power control:
- Power Assist:
- Transfer switch max (A): 50
- Number of AC inputs: 1
- Number of AC outputs: 2
- Multipurpose relais of driver: relais
- Lithium Ion battery compatible:
- Datacommunication:
- Power supply:
- Potential free contact:
Behuizing
- Material housing: staal
- Color: blue RAL5012
- Battery Connection: bouten M8
- AC Connection: screw terminal 13mm²
- Protection class: IP21
- Ventilation: Yes, temperature controlled
- Dimensions (hxwxd) (mm): 604x323x253
- Weight (kg): 38,6
Beveiligingen
- Low battery voltage:
- High battery voltage:
- Battery reverse polarity detection:
- Temperature too high:
- Overload:
- Short circuit:
- 230 V AC on inverter output:
- Input voltage ripple too high:
Normen
- Safety: EN60335-1, EN60335-2-29, EN62109
- Emission: EN55014-1, EN55014-2, EN61000-3-3
- Automotive Directive:
Fuse megafuse 200A - max. 58V
Fuse holder + cover for Megafuse (max. 50mm²)